The Rolex Submariner is one of the most iconic and popular luxury watches in the world. It is known for its durability, accuracy, and timeless design. However, like any mechanical watch, it requires periodic winding to keep it running smoothly. In this article, we will discuss how to wind a Rolex Submariner watch.
- Unscrew the Crown
The first step in winding a Rolex Submariner watch is to unscrew the crown, which is located on the right side of the watch case. To unscrew the crown, grip it firmly between your thumb and forefinger and turn it counterclockwise until it releases from the case.
- Wind the Watch
Once the crown is unscrewed, you can wind the watch by turning the crown clockwise. You should feel a slight resistance as you turn the crown, which indicates that the mainspring is being wound. Keep turning the crown until you feel it stop, which indicates that the mainspring is fully wound.
It is important to note that you should not overwind your Rolex Submariner, as this can damage the watch. Once you feel the crown stop, do not continue to turn it.
- Screw the Crown
Once you have finished winding the watch, screw the crown back into the case by turning it clockwise. Make sure to screw it in firmly to ensure that the watch is water-resistant.
- Set the Time
After winding the watch and screwing in the crown, you may need to set the time. To do this, pull the crown out to the second position, which allows you to adjust the time. Turn the crown clockwise or counterclockwise to set the time to the desired hour and minute.
- Push the Crown In
Once you have set the time, push the crown back into the case. Make sure that it is pushed in all the way to ensure that the watch is water-resistant.
In conclusion, winding a Rolex Submariner watch is a simple process that requires unscrewing the crown, winding the watch, screwing the crown back in, setting the time, and pushing the crown in. By following these steps, you can ensure that your Rolex Submariner is running smoothly and accurately.
