The Rolex Submariner is a popular and iconic luxury watch known for its durability, accuracy, and timeless design. If you own a Rolex Submariner, you may need to adjust the time periodically due to changes in time zones or daylight saving time. In this article, we will guide you through the steps to change the time on your Rolex Submariner.
Step 1: Unscrew the crown
The crown is the small knob on the side of the watch that is used to set the time and date. To unscrew the crown, turn it counterclockwise until it pops out to the first position. This position is used to adjust the date.
Step 2: Pull out the crown to the second position
To change the time on your Rolex Submariner, you need to pull out the crown to the second position. This position is used to adjust the time. Turn the crown clockwise or counterclockwise to set the time to the correct hour and minute.
Step 3: Set the date (if necessary)
If the date needs to be adjusted, turn the crown counterclockwise in the first position until the date changes. Then, turn the crown clockwise until the correct date is displayed.
Step 4: Push the crown back in and screw it down
Once you have set the time and date, push the crown back in to the first position. Then, turn the crown clockwise and push it in until it clicks into place. Finally, screw the crown down tightly to ensure that the watch is water-resistant.
Step 5: Verify the time
Check the time on your Rolex Submariner by comparing it to a reliable time source, such as a smartphone or atomic clock. If the time is incorrect, repeat the steps above to adjust the time again.
In conclusion, changing the time on your Rolex Submariner is a simple process that can be done at home with just a few steps. By unscrewing the crown, pulling it out to the second position, setting the time and date (if necessary), pushing the crown back in, and screwing it down, you can adjust the time on your watch in just a few minutes. Remember to always verify the time after adjusting it to ensure that your watch is accurate and reliable.